Welcome to the special performance of henan Sanders belt!

+86-371-55632397 / 55632398 EXT.801-809 +8613838258317
Language

What standards should be followed for the use of abrasive belt?

2019-09-18 10:58 Time of views

What standards should be followed for the use of abrasive belt?

Polishing abrasive belt manufacturers in the production of abrasive belts, the relatively simple grinding cost is also low, but the belt is used in accordance with some of the use of standards, such as the choice of the appropriate belt model, the appropriate size And a reasonable polishing process.

What standards should be followed for the use of abrasive belt?abrasive belt_flap disc manufcturer_flap wheel factory_polishing disc supplier

abrasive belt,flap disc manufcturer,flap wheel factory,polishing disc supplier

First of all, the choice of the appropriate polishing material belt model is to choose different models and belt joints according to different workpiece materials and different workpiece shapes;


Secondly, it is necessary to select the size of the polishing abrasive belt. If the size of the belt is too small, the surface quality of the workpiece can not be guaranteed. If the size of the belt is too large, it will cause breakage, so the particle size is also very important. .

What standards should be followed for the use of abrasive belt?abrasive belt_flap disc manufcturer_flap wheel factory_polishing disc supplier

abrasive belt,flap disc manufcturer,flap wheel factory,polishing disc supplier

Finally, in the polishing process of the abrasive belt, if a workpiece is subjected to multiple belt polishing processes, the particle size of the belt used in the latter lane can only jump over two grits number at the same time as the previous lane.


Wechat Service

abrasive belt  |  Zirconia Alumina Abrasive Belt  |  Compact Abrasive Belt  |  Silicon Carbide Abrasive Belt

Go Top