Welcome to the special performance of henan Sanders belt!

+86-371-55632397 / 55632398 EXT.801-809 +8613838258317
Language

Grinding belt polishing machine daily maintenance

2019-11-02 17:39 Time of views

Grinding belt polishing machine daily maintenance

Belt Polishing Machine Grinding - Daily Maintenance The coordinate grinding machine atlas has a special person responsible for maintenance and use, and regular maintenance to ensure that the machine is in good condition.

1. After the operation is completed, all parts of the machine, especially the sliding parts, should be cleaned and oiled.

2. Remove grinding debris between various parts of the grinding machine.

3, the necessary parts, on the rust.

Grinding belt polishing machine daily maintenance_zirconia abrasive belt_polishing machine_flap disc factory_grinding wheel

zirconia abrasive belt,polishing machine,flap disc factory,grinding wheel

Use the above grinding machine maintenance precautions

1. Before grinding, please correct the balance of the grinding wheel.

2. The grinding wheel must be carefully selected according to the material and hardness of the work.

3. The main shaft end and the grinding wheel flange should be coated with a thin oil film to prevent rust.

4. Please pay attention to the direction of spindle rotation.

5. It is forbidden to use foreign objects to clean the work and the machine.

6, please pay attention to whether the cable is loose, and indeed adjust.

7. Please pay attention to whether the oil window oil circuit is smooth.

8. The oil adjustment screw is adjusted to the appropriate amount, which is reduced and is increased.

9, vacuum box, filter steel, please clean once a week.

10. When the suction is weak, please check if the dust suction pipe is clogged with powder.

11. The suction pipe must be kept clean, otherwise it will cause burning.


Wechat Service

abrasive belt  |  Zirconia Alumina Abrasive Belt  |  Compact Abrasive Belt  |  Silicon Carbide Abrasive Belt

Go Top