The storage of the belt is very important for the use of the belt, especially for the wide belt.Ideal storage conditions and reasonable storage methods can ensure that the belt is used in the best condition.
1. Temperature and humidity requirements
Ideal temperature: 18℃ ~ 22℃
Ideal humidity: 40% to 65%
Sand belt should not be stored in the place where the temperature and humidity change greatly, too high temperature will make the binder aging, reduce the service life of the belt;Synthetic fiber base material belt (such as polyester cloth belt) is more sensitive to cold, can not be stored in a cold warehouse.
Too high or too low humidity will cause sand belt to produce certain deformation, which will reduce the adhesive strength of sand belt. In particular, the influence of excessive humidity on the belt is more serious, in addition to the water-resistant belt, the general sand belt after the use of moisture, are prone to break, wrinkle and other phenomena so that the belt is scrapped.In addition, the grinding material is easy to adhere to the surface of the belt, reducing the service life of the belt.
High temperature and low humidity have a great influence on the paper-based belt, making it brittle and easy to break and scrap.
2. storage
The storage of sand belt should be cool, dry and ventilated. The belt should be placed on the shelf, not on the ground;The cargo rack should be kept at a distance of 200 ~ 500mm from the floor and wall, while avoiding the heat dissipation and drainage devices.Try not to open the packing case with unused belt.Do not pile heavy objects on the belt boxes to avoid creases and cracks.
abrasive belt | Zirconia Alumina Abrasive Belt | Compact Abrasive Belt | Silicon Carbide Abrasive Belt
Copyright ©Henan Sanders Abrasives Co.,Ltd All Rights Reserved. Technical Support By Yihong Century Network Technology Co., Ltd. Sitemap