Welcome to the special performance of henan Sanders belt!

+86-371-55632397 / 55632398 EXT.801-809 +8619937510097

The storage of the sanding belt

2019-12-27 17:15 Time of views

The storage of the belt is very important for the use of the belt, especially for the wide belt.Ideal storage conditions and reasonable storage methods can ensure that the belt is used in the best condition.

The storage of the sanding belt_zirconia abrasive belt_sanding belt_belt sander_abrasive belts

1. Temperature and humidity requirements

Ideal temperature: 18℃ ~ 22℃

Ideal humidity: 40% to 65%

Sand belt should not be stored in the place where the temperature and humidity change greatly, too high temperature will make the binder aging, reduce the service life of the belt;Synthetic fiber base material belt (such as polyester cloth belt) is more sensitive to cold, can not be stored in a cold warehouse.

Too high or too low humidity will cause sand belt to produce certain deformation, which will reduce the adhesive strength of sand belt. In particular, the influence of excessive humidity on the belt is more serious, in addition to the water-resistant belt, the general sand belt after the use of moisture, are prone to break, wrinkle and other phenomena so that the belt is scrapped.In addition, the grinding material is easy to adhere to the surface of the belt, reducing the service life of the belt.

High temperature and low humidity have a great influence on the paper-based belt, making it brittle and easy to break and scrap.

2. storage

The storage of sand belt should be cool, dry and ventilated. The belt should be placed on the shelf, not on the ground;The cargo rack should be kept at a distance of 200 ~ 500mm from the floor and wall, while avoiding the heat dissipation and drainage devices.Try not to open the packing case with unused belt.Do not pile heavy objects on the belt boxes to avoid creases and cracks.

Wechat Service

abrasive belt  |  Zirconia Alumina Abrasive Belt  |  Compact Abrasive Belt  |  Silicon Carbide Abrasive Belt

Go Top