Welcome to the special performance of henan Sanders belt!

+86-371-55632397 / 55632398 EXT.801-809 +8613838258317
Language

Fabric base organization

2020-01-17 16:56 Time of views

Fabric organization. Fabric organization refers to the warp and weft interweave with each other according to a certain rule, so as to form a certain pattern and pattern on the surface of fabric.

Fabric base organization_abrasive belt factory_sanding belt cloth_aluminium oxide abrasive belt_sander belt

abrasive belt,sanding belt cloth,Aluminium Oxide Abrasive Belt,Sanders abrasive sander belt

The basic structures are: plain weave, twill, satin weave, and their evolution.

Plain weave, warp and weft yarn to take a float, cross each other. Can use 1/1 to express, its characteristic is: interweave dot is most, feel hard solid, quality of a material is close firm, the surface is level off, front and back shape is same, application is widest, be like plain cloth poplin.

Fabric base organization_abrasive belt factory_sanding belt cloth_aluminium oxide abrasive belt_sander belt

abrasive belt,sanding belt cloth,Aluminium Oxide Abrasive Belt,Sanders abrasive sander belt

Twill tissue needs at least three warp and weft yarns to form a complete tissue: 2/1, 2/2, 3/1, 4/1, 3/2, etc. Its characteristic: interlacing point is continuous and become oblique grain.Feel precise and thick, surface gloss and softness, such as serge, gabardine, khaki.

Satin weave needs at least five warp and weft yarns, with 5/2 or 1/4, 5/2 or 4/1, etc., its characteristics: interweave points are not continuous, interweave points are few, warp and weft yarns emerge very long, feel the surface is smooth, soft, good luster, but not too strong, not wear-resisting, easy to rise, mainly used for silk fabrics, such as vertical and horizontal satin.


Wechat Service

abrasive belt  |  Zirconia Alumina Abrasive Belt  |  Compact Abrasive Belt  |  Silicon Carbide Abrasive Belt

Go Top